Before using the SLF Visible Blackhead Remover to remove any blackheads on your nose, cheeks, or other areas, it should be fully charged. However, there is a chance you may encounter some difficulties with charging the blackhead popping tool, in which case you should follow the suggestions below.
Only use the included Micro-USB cable with the device. Check that the cable isn’t wet, dirty, frayed, or damaged in any other way. Do not use the cable if it is damaged, and never use a different Micro-USB cable to try and charge the product.
Check that your SLF Visible Blackhead Remover’s charging port is clean, dry, and free of any dirt, dust, or other debris. The remover tool may not charge properly if the port is wet or obstructed by any substances. Ensure it is not damaged or visibly malfunctioning in any way.
You should also make sure that your chosen USB power source has enough power to sufficiently charge the blackhead remover. The USB power source must be able to output 5V/1A of power in order to properly and reliably recharge your product. Try using a different USB power source and see if that helps.
If your SLF Visible Blackhead Remover still won’t charge properly, even after following all of the above suggestions, then there may be an issue with the blackhead remover’s internal circuitry. Do not attempt to modify, disassemble, or repair this device by yourself. Instead, please call or email us at support@tzumi.com or 1-855-GO-TZUMI, and an experienced customer support representative will be happy to assist you.
Check that your blackhead remover tool is sufficiently charged. Your SLF Visible Blackhead Remover should fully charge within 2 hours.
Make sure the remover is clean and free of any dirt, dust, or other debris. The product may not work properly if it is dirty. In addition, ensure that it is completely dry, as it may not turn on or work properly if water has made its way into one of the remover tool’s openings.
If the Power Button is damaged or visibly malfunctioning, then you may not be able to press it properly and turn the device on. This could also mean that there is an issue with the internal circuitry of the remover tool. In this case, do not continue to try and turn on the remover too. Contact Customer Service as soon as possible for further instructions.
Make sure the device is sufficiently charged, powered on, and that your chosen silicone suction attachment is firmly connected to the remover tool. Press the tool firmly against the blackhead, and increase the suction intensity if necessary. There are 3 suction intensity levels to choose from.
Check that you are directly hitting the blackhead. Use the built-in LED magnifying glass to ensure you are using the device in the right spot. Make sure you are using the right suction attachment for the part of your body that you are targeting. Use the small suction nozzle for sensitive areas, the large suction nozzle for your T-zone (forehead, nose, and chin), and the oval suction nozzle for any sensitive areas.
Again, it’s crucial that you thoroughly hand-wash the silicone suction attachments after each use. The remover tool may not properly remove your blackheads if your chosen suction attachment is dirty, wet, damaged, or visibly malfunctioning in some other way.
Never use the SLF Visible Blackhead Remover on your eyes, mouth, nostrils, ears, or genitals. Using it on these areas can cause serious injury and deep scars on your skin. In addition, never attempt to use the tool on skin without a blackhead or pimple.
Only use and store your blackhead remover tool in cool, dry environments, away from extremely hot or cold temperatures, heat sources, water, and other liquids. Keep it far away from children and pets – this product is not a toy, and it contains detachable parts that may present a choking hazard.
Most importantly, do NOT use the blackhead remover tool in a bathtub, shower, pool, or other body of water. This is very likely to result in serious injury or even death, as well as irreversible damage to the product.
It’s important to pay lots of attention to certain features when you’re scouring the market for a new blackhead remover tool. You want to buy the right tool that will cleanly and safely remove blackheads and pimples from your face, without leaving long-lasting scars or damaging your skin. You should focus on a remover tool’s suction power and versatility, included suction attachments, ease of use, charging time, size, and weight.
When buying a new blackhead remover tool, you want one that has multiple suction attachments that are powerful and comfortable, so that you can fully customize your skincare and blackhead popping routine. In addition, you should search for one with several suction intensity levels, ideally 3 or more. This will let you quickly and easily penetrate larger blackheads and remove the sebum (dirt) that is trapped underneath the skin.
Not only that, but your blackhead remover tool should also be lightweight and compact, so that you can take it with you anywhere for relief while you’re on the go. Whether you’re on a vacation, going to work, or off to a wedding, you want a product that can remove stubborn blackheads in just a few minutes, no matter where you may be. The best remover tools can be recharged quickly, within 1-2 hours, and last for a long time before running out of power. They can also be recharged via most power sources – those that are universally compatible with USB power sources are always among the top picks!
The SLF Visible Blackhead Remover gives you the smooth, clear skin you’ve always wanted with just the press of a button, and lets you remove those pesky blackheads or pimples with easy-to-use tools!
It features 3 suction nozzle sizes for customized use: small for sensitive areas, large for T-zone, and oval for nostril area. The blackhead removal tool also has 3 suction intensity settings for gently removing blackheads, excess oil, makeup, and dirt from your pores.
Plus, its LED-backlit magnifying glass lets you easily catch every blackhead and pimple. Cordless, compact, and USB-rechargeable, this blackhead remover tool can go with you anywhere, so you can enjoy having blemish-free skin wherever you go!
The price of a blackhead remover tool can vary widely. Some cost under $10, while more advanced ones can be priced at $40 and beyond, depending on where you shop and what’s included with the blackhead remover tool.
Ideally, your new blackhead remover will cost anywhere between $25 and $35, as products within this range are typically the perfect blend of both reliable value and affordability. Of course, there are many great options that fall under or over this price range – at the end of the day, what matters is that you remove those annoying blackheads safely and quickly. As long as it doesn’t scar your skin and leave your pores open for another blackhead, it is a good choice.
The SLF Visible Blackhead Remover, priced at just a bit over $30, is one of the best tools for getting rid of blackheads and pimples in a flash. With 3 different suction nozzles and intensities, as well as easy one-touch controls, it is the perfect combination of both cost effectiveness and powerful, customizable treatment that’ll give you the clear, gorgeous skin that others will rave over.
You can safely and reliably use a blackhead remover tool almost anywhere you see a blackhead or pimple!
The best options out there have sturdy and reliable tools that won’t break on you or damage your skin. You can use most blackhead remover tools on your nose, chin, cheek, forehead, and other large areas on your face, as well as almost anywhere on your chest or back.
Whether you’re hoping to remove blackheads, pimples, makeup, or excess oils, you should be able to use a blackhead remover tool on the above areas with little issue.
If you’re not sure on how to properly use a blackhead remover tool for the first time, then this blog is for you. Just follow these quick and easy steps to effectively prepare your skin beforehand, and learn more about how to remove those deep blackheads from your face, chest, or back.
It’s essential that you start by cleaning your skin with a facial cleanser, then using a gentle face wash product to remove any lingering dirt, makeup, or other substances.
Then, you should apply steam to your face (particularly your nose) to soften your skin, and make it easier for the remover tool to extract the blackhead. You can do this via either a facial steamer, or a 3–5-minute hot shower. Do not over-steam your face, though, as this may overheat the skin and make it difficult for the remover tool to fully suck out the blackhead.
Finally, make sure to clean your blackhead removal tool fully and thoroughly. Use a soft cloth that’s either dry or slightly damp (depending on the product) to completely sterilize it. This is a crucial step, as any lingering bacteria, dirt, or debris can make its way into the blackhead opening once it’s removed. This opens the door for future blackheads in that area, and even potential infections.
You must be very careful when you are attempting to remove a blackhead from your nose with a remover tool, especially if it is your first time. Remember that the easiest way to prevent getting blackheads in the first place is to wash and rinse your face thoroughly every day, at least twice. You should do it even more often if you exercise a lot.
After following the preparation steps listed above, turn the blackhead remover tool on. Align the suction nozzle with the blackhead on your nose. Do this in front of a clean mirror in a well-lit area, preferably in a bathroom. Gently press the suction nozzle against the blackhead – start with the lowest suction intensity if it’s your first time using the remover tool.
Wait for 10-20 seconds, then check the blackhead. If it’s gotten smaller or has disappeared, then stop and turn off the remover tool. If it hasn’t shrunk, you can try again, or press the nozzle against the blackhead a bit harder. If this fails, you can try increasing the suction intensity level.
Do not continue if your nose begins to bleed. This means that you have removed all of the sebum, dirt, and dead skin from the blackhead. Continuing may cause deep bruising and/or injury to your skin. Finish up by gently washing your nose with warm water and soap, then drying it with a soft cloth.
Before using the SLF Visible Blackhead Remover to remove any blackheads on your nose, cheeks, or other areas, it should be fully charged. However, there is a chance you may encounter some difficulties with charging the blackhead popping tool, in which case you should follow the suggestions below.
Only use the included Micro-USB cable with the device. Check that the cable isn’t wet, dirty, frayed, or damaged in any other way. Do not use the cable if it is damaged, and never use a different Micro-USB cable to try and charge the product.
Check that your SLF Visible Blackhead Remover’s charging port is clean, dry, and free of any dirt, dust, or other debris. The remover tool may not charge properly if the port is wet or obstructed by any substances. Ensure it is not damaged or visibly malfunctioning in any way.
You should also make sure that your chosen USB power source has enough power to sufficiently charge the blackhead remover. The USB power source must be able to output 5V/1A of power in order to properly and reliably recharge your product. Try using a different USB power source and see if that helps.
If your SLF Visible Blackhead Remover still won’t charge properly, even after following all of the above suggestions, then there may be an issue with the blackhead remover’s internal circuitry. Do not attempt to modify, disassemble, or repair this device by yourself. Instead, please call or email us at support@tzumi.com or 1-855-GO-TZUMI, and an experienced customer support representative will be happy to assist you.
Check that your blackhead remover tool is sufficiently charged. Your SLF Visible Blackhead Remover should fully charge within 2 hours.
Make sure the remover is clean and free of any dirt, dust, or other debris. The product may not work properly if it is dirty. In addition, ensure that it is completely dry, as it may not turn on or work properly if water has made its way into one of the remover tool’s openings.
If the Power Button is damaged or visibly malfunctioning, then you may not be able to press it properly and turn the device on. This could also mean that there is an issue with the internal circuitry of the remover tool. In this case, do not continue to try and turn on the remover too. Contact Customer Service as soon as possible for further instructions.
Make sure the device is sufficiently charged, powered on, and that your chosen silicone suction attachment is firmly connected to the remover tool. Press the tool firmly against the blackhead, and increase the suction intensity if necessary. There are 3 suction intensity levels to choose from.
Check that you are directly hitting the blackhead. Use the built-in LED magnifying glass to ensure you are using the device in the right spot. Make sure you are using the right suction attachment for the part of your body that you are targeting. Use the small suction nozzle for sensitive areas, the large suction nozzle for your T-zone (forehead, nose, and chin), and the oval suction nozzle for any sensitive areas.
Again, it’s crucial that you thoroughly hand-wash the silicone suction attachments after each use. The remover tool may not properly remove your blackheads if your chosen suction attachment is dirty, wet, damaged, or visibly malfunctioning in some other way.
Never use the SLF Visible Blackhead Remover on your eyes, mouth, nostrils, ears, or genitals. Using it on these areas can cause serious injury and deep scars on your skin. In addition, never attempt to use the tool on skin without a blackhead or pimple.
Only use and store your blackhead remover tool in cool, dry environments, away from extremely hot or cold temperatures, heat sources, water, and other liquids. Keep it far away from children and pets – this product is not a toy, and it contains detachable parts that may present a choking hazard.
Most importantly, do NOT use the blackhead remover tool in a bathtub, shower, pool, or other body of water. This is very likely to result in serious injury or even death, as well as irreversible damage to the product.
